#1 MARK LOCATION

Mark the locations you plan to install the ground screws. 

(Alternate install location may be needed if boulder or debris exist)

#2 STRING-LINE

Use string-line to ensure a straight and uniform install.

(Alternate install locations may be needed if boulder or debris exist)

#3 AKGS PELICAN CASE

                     52 lbs

•D4100

•Torque Arm

•Driver Bit

•Laser Lever 

•Survey Rod 

•Magent Level x 2

#4 DRILL OPERATION

BEFORE PRESSING TRIGGER Verify torque arm is snug against ground spike, wall, or supporting structure and ready to receive torque.

WAIT 5 SECONDS for gearbox to reset between accidental trigger pulls. 

WAIT 5 SECONDS for torque arm to decompress before pressing trigger again.

HIGH/LOW SELECTOR     If Hi/Low selector will not move freely, press trigger in small increments until gearbox aligns, allowing selector to move freely.

VERIFY CONNECTIONS     Ensure torque arm and driver bit are secure before driving screws.

#5 TORQUE ARM

Verify torque arm has sufficient amount of space to retract when choosing initial ground spike location. 

Note: (If torque arm retracts fully, move ground spike as needed)

DANGER: Keep personel clear of energized torque arm.  (700+ ft/lbs)

#6 DRIVING SCREW

• Driver Bit Secure 

• Bullseye Level

• Magnet Level

• No Churning (Rock/Debris)

HIGH GEAR Until drill motor begins to sound stressed

LOW GEAR Until install complete

LOW GEAR While reversing and making minor adjustments

#7 SURVEY ROD

Before reaching full install depth, place Survey Rod on back of D4100 motor housing to acquire accurate and uniform grade level.

LOW GEAR: Forward and Reverse for precise adjustments. 

#8 SADDLES & BOLTS

When installing saddles leave bolts loose, allowing for leveling of foundation posts. After posts and beams are level and secured, tighten bolts according to the orientation of beam post.

Install timber locks or any other securement hardware you choose.

Frequently Asked Questions

Why should I consider using ground screws?

What are the potential benefits of using ground screws?

I don't think I can use the tool, will you install for me?

How do I reserve my tool online?

This seem tough, why are there so many procedures?